Setting Up The Machine; Checking The Location Of This Machine - Ricoh Network Scanning Unit A Operating Instructions Manual

2. Setting Up the Machine

This section explains how to setup this machine to get it ready for use, and how
to make necessary connections.

Checking the Location of This Machine

Before setting up this machine, take a few minutes to check the location where
you are going to install it.
R WARNING:
• Make sure the wall outlet is near the machine and easily accessible so
that in event of an emergency it can be unplugged easily.
R CAUTION:
• Keep the machine away from humidity and dust. A fire or an electric shock
might occur.
• Do not place the machine on an unstable or tilted surface. If it topples over,
it could cause injury.
• Place this machine on a level, stable, vibrating-free surface. Allowable incli-
nation of the surface for installation is within 5 mm (0.2") (when measuring
difference of heights between an end and the other end of this machine, com-
pared to a level surface).
21