Process Flow; Scan To Ftp - Ricoh Network Scanning Unit A Operating Instructions Manual

Process Flow

A A A A
Specify a shared folder, file name, and make necessary settings for scan-
ning using "4. Client computer", or the control panel of "1. This machine."
B B B B
Originals are scanned by "2. Scanner."
C C C C
A scanned data is saved in a specified shared folder on "3. Computer with
a shared folder."
D D D D
You can use a scanned data from "4. Client computer."

Scan to FTP

It is possible to register FTP servers to this machine as destinations for sending
a scanned data. You can easily send and save scanned files to an FTP server that
is registered to this machine.
1.
This machine
Connect this machine to a network
( TC P/IP ) us ing a 100BA SE- TX , or
10BASE-T cable. It is possible to connect
using an optional wireless LAN card.
2.
Scanner
Connect this machine to a scanner by the
SCSI cable.
3.
FTP server
You can specify an FTP server to save
scanned files. Note, however, that it is es-
sential to have the FTP server inside the
LAN/WAN to where this machine be-
longs. It is not possible to access an FTP
server via a proxy server.
4.
Client computer
You can browse the scanned files saved
to an FTP server from a client computer.
You need to have an FTP client program
on a computer to connect to an FTP serv-
er.
Outline
1
AHQ007S
7