Error Messages Displayed On The Web Status Monitor - Ricoh Network Scanning Unit A Operating Instructions Manual

Error messages displayed on the Web Status Monitor

Message
Wrong parameter for Lo-
gin User Name.
Wrong parameter for
Send File Path Name.
Unable to make configu-
rations because Scanner
is currently in use.
Please try again later.
Possible Cause and Required Action
• The format for entering [Login User Name] is incorrect.
Confirm that [Login User Name] is specified in the for-
mat of "work group name\user name" or "domain
name\user name." For example, when the work group
name is "abcd" and the user name is "john", enter "ab-
cd\john" into [Login User Name].
• The information entered to [Send File Path], [Login User
Name], or [Login Password] is incorrect. When entering
information, be careful not to mix up upper case letters
and lower case letters.
• In most cases, it is required to enter the password into
[Login Password] for the user entered in [Login User
Name]. However, when accessing a shared folder that is
password protected under Windows 95/98/98SE/Me,
it is necessary to enter the shared folder's protection
password into [Login Password]. Confirm the operating
system of the computer that you are trying to access,
and make necessary settings in accordance with it, as
described the above.
• The scanner connected to this machine is currently
used as a network TWAIN scanner, by another client
computer.
• You may be trying another [Enter Custom Send File] op-
eration. Before performing another [Enter Custom Send
File] operation, it is necessary to press [Exit] on the con-
trol panel of this machine to display a Send File stand-
by screen.
Troubleshooting
11
171