Example Procedures Using [Configuration] Main Menu; Configuring [Scan Settings]; Configuring [E-Mail Address] - Ricoh Network Scanning Unit A Operating Instructions Manual

Example Procedures Using
[Configuration] Main Menu
This section gives you a few example
procedures, to make settings of this
machine using the Web Status Moni-
tor.

Configuring [Scan Settings]

A A A A
Click [Configuration] on the main
menu.
The password input dialog box
appears.
Note
❒ Once you set the password, the
password input dialog box will
not appear from the second
time. When the dialog doesn't
appear, proceed to
B B B B
Enter "scanner" for the user name,
and enter the password.
Note
❒ The user name is fixed to "scan-
ner."
❒ The password is set to "pass-
word" as the factory default.
You can change the password
using [Configuration] → [Basic
Settings] → [Password].
C C C C
Click [OK].
The setup screen appears.
D D D D
Click [Basic Settings], and then
[Scan Settings] in the sub-menu ar-
ea.
E E E E
Click [Default] in the [Select User]
area.
F F F F
Make settings to each of the setup
items on the screen.
G G G G
D
.
H H H H

Configuring [E-mail Address]

A A A A
B B B B
Configuring Settings Using a Web Browser
Note
❒ Register the scanning conditions
for a scanner you use that are
most frequently used in [De-
fault]. If scanning conditions are
not specified for a Send Scan op-
eration, the conditions set to
[Default] applies.
Click [OK].
Note
❒ Be sure to click [OK] to save the
settings you have made on the
currently displayed screen.
Once you move to another page
without clicking [OK], all the
settings that you have made on
t h e p r e v i o u s p a g e w i l l b e
cleared.
❒ The changes will be discarded if
you click [Cancel].
By selecting [User 1], [User 2], or
[User 3] in the [Select User] area, re-
F F F F
peat the steps and
them, as necessary.
Click [Configuration] on the main
menu.
The password input dialog box ap-
pears.
Note
❒ Once you set the password, the
password input dialog box will
not appear from the second
time. When the dialog doesn't
appear, proceed to
Enter "scanner" for the user name,
and enter a password.
G G G G
for each of
D
87
3