Installing Twain Driver - Ricoh Network Scanning Unit A Operating Instructions Manual

Installing TWAIN Driver

Install the TWAIN driver using Auto
Run.
A A A A
Start Windows, and then insert
the supplied CD-ROM labeled
"Scanner Driver(s), Utilities and
Operating Instructions" into the
CD-ROM drive of the client com-
puter.
The CD-ROM Launcher screen ap-
pears.
Reference
If the installer does not start au-
tomatically, see p.103 "Auto
Run Program".
B B B B
Click a button that shows the
name of the scanner connected to
this machine.
• The installer of the respective
scanner is activated. Install ac-
cording to the instruction on the
screen.
• The client computer installed
with the TWAIN driver can get
the scanning data from a scan-
ner connected to this machine
using a TWAIN-compliant ap-
plication.
C C C C
The installer of the TWAIN driv-
er starts. Follow the instructions
on the screen.
Note
❒ When the installation is com-
plete, a message to prompt you
to restart the client computer
may appear. In this case, restart
the client computer.
❒ After the installation is complet-
ed, a menu with the name of a
scanner you have connected is
created in the "Program" folder
of the Start menu. Help can be
displayed from here.
❒ Notes on using with the net-
work TWAIN scanner are pro-
vided in "Readme.txt." Be sure
to read them before use.
Installing Software
105
3