Connecting To A Power Source; Turning On The Power - Ricoh Network Scanning Unit A Operating Instructions Manual

Connecting to a Power Source

This section explains how to connect
this machine to a power source, using
the bundled AC power cord.
R WARNING:
• Do not use with a power
source with a voltage different
from the specified voltage. Do
not use a power outlet with
multiple devices plugged in.
These could create the risk of
fire or electric shock.
• Avoid the use of an extension
cord.
• Do not damage, break, twist or
modify the Power Cord. Plac-
ing heavy objects on the cord,
pulling on or bending it exces-
sively can damage the Power
Cord, creating the risk of fire
or electric shock.
• Never touch or unplug the
power plug with wet hands.
This can create the risk of elec-
tric shock.
R CAUTION:
• When unplugging from an outlet,
be sure to grasp the plug when
pulling. Never pull on the cord.
This could damage the cord cre-
ating the risk of fire or electrical
shock.
A A A A
Confirm that the power switch is
set to off.
B B B B
Connect the bundled AC adaptor
and the power code.
Connecting to a Power Source
C C C C
Push the terminal of the AC adap-
tor all the way into the power con-
nector on this machine.
Note
❒ Be sure to use the power cord
that comes with this machine.
D D D D
Insert the power plug into the
power outlet.

Turning on the Power

Turn on the power of this machine af-
ter turning on the power of the con-
nected scanner.
A A A A
Turn on the power of a scanner
connected to this machine.
B B B B
Turn on the power of this machine.
2
ZKJH070J
25