Using [Enter Custom Send File] To Send A Scanned File To An Unregistered Shared Folder; Procedure Breakdown - Ricoh Network Scanning Unit A Operating Instructions Manual

Using [Enter Custom Send File] to Send a Scanned File to an Unregistered Shared Folder

Using [Enter Custom Send File] to Send a
Scanned File to an Unregistered Shared
Folder
By using the [Enter Custom Send File] function on the Web Status Monitor, you can
send a scanned file to any of Windows shared folders that you have an access
right.

Procedure Breakdown

The following overview diagram shows the flow of the steps for sending a
scanned file to a Windows shared folder using the Web Status Monitor. Note
that the underlined steps are essential.
Note
❒ Some of the steps such as "Making Scan Settings" are identical to those ex-
plained under "Sending Scan Files by E-mail." See the relevant pages shown
to the right of the following overview diagram.
Display the Web Status Monitor on a Web browser.
Display the [Enter Custom Send File] page and make necessary settings.
Place originals on the ADF or on the exposure glass of a scanner.
Press the { { { { Start} } } } key of this machine.
Confirm the transmission results by using the Web Status Monitor.
See p.85 "To access
this machine from a
Web browser".
See p.136 "Using [En-
ter Custom Send File]
Function".
See p.118 "Before
Sending Scan Data".
See p.127 "Performing
Scan Operation".
See p.129 "Checking
Transmission Re-
sults".
6
135