Print Scan Settings; Information To Set In [Print Scan Settings] - Ricoh Network Scanning Unit A Operating Instructions Manual

Print Scan Settings

This section describes all the setup items included in the Print Scan Settings menu, and
shows you how to configure these settings using the control panel of this machine.
Reference
The System Settings menu is available by pressing the { { { { User Tools} } } } key.
For the configuration using the System Settings menu, see p.51 "Configuring
[System Settings]".

Information to Set in [Print Scan Settings]

❖ ❖ ❖ ❖ Max. Number of Copies
This item lets you set an upper limit for the number of copies that you can
specify when you perform a Print Scan operation by a scanner, within the
range of 1 to 999.
Note
❒ You can also configure this setting by selecting [Configuration] → [Print Scan
Settings] → [Print Scan] on the Web Status Monitor.
❖ ❖ ❖ ❖ Color/Black and White
This item lets you select the default Scan Settings for Print Scan, between
"Color" and "Black and White."
• Color:Text
Scans standard originals containing mainly text as the color images.
• Color:Text/Photo
Scans originals containing graphs, photos, and text as the color images.
• Color:Photo
Scans originals containing mainly color photos and graphs as the color images.
• Black and White:Text
Scans standard originals containing mainly text as the black-and-white bi-
nary images.
• Black and White:Text/Photo
Scans originals containing graphs, photos, and text as the black-and-white
binary images.
• Black and White:Photo
Scans originals containing mainly black-and-white photos and graphs as
the black-and-white binary images.
Note
❒ Scan by a scanner is performed with black and white or in gray scale, de-
pending on the setting you have configured in the Print Scan Settings
menu. If you select "Text" as [Scan Type] in the Print Scan Settings menu,
scan is performed with black and white. If you select "Text/Photo" or
"Photo", scan is performed with gray scale.
Print Scan Settings
67
3