Confirming The Scan Settings - Ricoh Network Scanning Unit A Operating Instructions Manual

Sending Scan File by E-mail
Reference
See p.70 "Information to Reg-
ister in [Scan Settings]" for
details about each of the set-
up items.
Note
❒ For example, [Resolution] is
selected here.
C Highlight the option you wish
to select by using the { { { { 1 1 1 1 } } } } or
{ { { { 0 0 0 0 } } } } key, and then press [OK].
5
Note
❒ Pressing [Cancel] discards the
selected option, and returns
to the previous screen.
❒ When you select "Custom
Resolution" for [Resolution]
and/or "Custom Area Set-
ting" for [Scan Size], use the
Number keys to specify the
values.
D Repeat the steps B B B B and C C C C as
necessary.
E When you are finished, press
[Exit].
This returns to the Scan Settings
screen.
F Press [OK].
This returns to the E-mail/Send
File standby screen, and the cur-
rent Scan Setting is displayed
on the third line of the screen.
124

Confirming the Scan Settings

You can confirm the current Scan Set-
tings, or the Scan Settings that you
have registered to [Default], [User 1],
[User 2] or [User 3].
Note
❒ You can confirm the [Default] set-
tings by selecting [Manual] in the
step B below, unless you configure
the Scan Settings manually. After
you have manually configured the
Scan Settings, selecting [Manual]
displays the current settings.
A A A A
Press [Settings].
The Scan Settings screen is dis-
played.
B B B B
Use the { { { { 1 1 1 1 } } } } or { { { { 0 0 0 0 } } } } key to high-
light [Manual], [User 1], [User 2] or
[User 3] on the screen, and then
press [Status].
The status screen appears.
C C C C
Use [↓ ↓ ↓ ↓ Next] or [↑ ↑ ↑ ↑ Prev.] to display
the setting of the setup item you
wish to confirm.
D D D D
When you are finished, press [Exit].