Configuring [Send Scan Settings] - Ricoh Network Scanning Unit A Operating Instructions Manual

Configuring the Scanner Settings
Configuring [Send Scan
Settings]
Follow the steps below to configure
the Send Scan Settings using the con-
trol panel of this machine.
Important
❒ Be sure to connect a scanner to this
machine before configuration, and
3
turn on the power of the scanner
before turning on this machine.
You cannot make any settings
without the connection.
Note
❒ You can also configure these set-
tings using the Web Status Moni-
tor.
Reference
See p.13 "Using Keys Displayed on
the Screen" for information about
how to select items displayed on
the screen.
A A A A
Press the { { { { User Tools} } } } key
The Scanner Features menu is dis-
played.
B B B B
Press the { { { { 2} } } } key.
The Send Scan Settings menu is
d i s p l a y e d , a n d " 1 . S e n d
File/TWAIN Priority" appears as
the setup item currently selected.
64
C C C C
Press [Settings].
The setting screen for "1. Send
File/TWAIN Priority" appears.
D D D D
Select the function that you main-
l y u s e f r o m " S e n d F i l e " o r
"TWAIN."
• The option currently selected is
displayed first.
• The "*" mark appears along
with the option currently select-
ed.
• Use [↑ ↑ ↑ ↑ ] or [↓ ↓ ↓ ↓ ] to display the op-
tion you wish to select.
E E E E
Press [OK].
This saves the setting you have
made, and returns to the Send Scan
Settings menu.
Note
❒ Pressing [Cancel] discards the
selected option, and returns to
ZKJS020J
the previous screen.
F F F F
Press [↓ ↓ ↓ ↓ Next].
"2. TWAIN Standby Time" ap-
pears as the setup item currently
selected.
G G G G
Press [Settings].
The setting screen for "2. TWAIN
Standby Time" appears.