Function Table; Basic Settings - Ricoh Network Scanning Unit A Operating Instructions Manual

Configuring the Scanner Settings
❖ ❖ ❖ ❖ The Method Row
Under "Method" in the table on the next page, there is a column for each of
the setup methods listed below.
Column name:
This machine
Web
• A "b" in a column means that the setup item to the left can be configured us-
ing the method.
3
• A "x" in a column means that the setup item to the left cannot be configured
using the method. Use the other available method for the setting.
• A "-" in a column means that the item to the left cannot be changed (for the
display information purpose only).
• A "(null)" in the "Default" column means that the setup item to the left has
no factory default value.

Function Table

Basic Settings

Setup Item
Device Name
Comment
URL Name
URL
Help URL
38
Means if:
Each of the setup items to the left can be configured using the
control panel of this machine.
Each of the setup items to the left can be configured using the
Web Status Monitor.
Default
*1
RNP******
(null)
URL
/cgibin/url.cgi/
/cgibin/help.cgi
Purpose
b b b b
Method
b × b
× b
× b
× b
× b