Table of Contents
Advertisement
9. Sending Scan Files Using
This chapter explains the procedures to deliver a scanned file to multiple desti-
nations by using a Delivery Server with ScanRouter delivery software installed.
Procedure Breakdown
The following overview diagram shows the flow of the steps for sending a
scanned file using an address book on a Delivery Server. Note that the under-
lined steps are essential.
Note
❒ Some of the steps such as Making Scan Settings are identical to those ex-
plained under "Sending Scan Files by E-mail." See the relevant pages shown
to the right of the following overview diagram.
Place originals on the ADF or on the exposure glass of a scanner.
Select a destination on this machine.
Press the { { { { Start} } } } key of this machine.
Confirm the transmission results by using the Web Status
*1
The settings that are configured using ScanRouter delivery software determine the
file type and compression method of the image file to be distributed.
Select a sender.
*1
Make scan settings.
Monitor.
Delivery Server
See p.118 "Before Send-
ing Scan Data".
See p.158 "Selecting De-
livery Destinations".
See p.126 "Selecting a
Sender".
See p.123 "Making Scan
Settings".
See p.127 "Performing
Scan Operation".
See p.129 "Checking
Transmission Results".
157
Advertisement
Table of Contents
