Procedure Breakdown - Ricoh Network Scanning Unit A Operating Instructions Manual

7. Sending Scan File by Scan
This chapter explains the procedures to send a scanned file to an FTP server.

Procedure Breakdown

The following overview diagram shows the flow of the steps for sending a
scanned file to an FTP server that is registered to this machine. Note that the un-
derlined steps are essential.
Note
❒ Some of the steps such as Making Scan Settings are identical to those ex-
plained under "Sending Scan Files by E-mail." See the relevant pages shown
to the right of the following overview diagram.
Place originals on the ADF or on the exposure glass of a scanner.
Select an FTP server on this machine.
Press the { { { { Start} } } } key of this machine.
Confirm the transmission results by using the Web Status
Select a file name.
Make scan settings.
Monitor.
to FTP
See p.118 "Before Sending
Scan Data".
See p.142 "Selecting an
FTP Server".
See p.134 "Selecting a File
Name".
See p.123 "Making Scan
Settings".
See p.127 "Performing
Scan Operation".
See p.129 "Checking
Transmission Results".
141