Advertisement
<Work procedure 2-13>
Procedure for Replacing the ITB Cleaning Unit
Replacement Procedure
1) Open the Front Left Cover and the Front Right Cover.
2) Remove Process Unit Cover.
3) Pull Out ITB Unit.
4) Remove ITB Cleaning Unit.
Caution : Before installing the ITB cleaning unit
ITB cleaning unit assigned as a part is not supplied with toner, hence it is necessary to supply the toner from
the toner bottle in the content.
5) Remove the cleaner cover and put it on a paper.
- 4 screws
6) While rotating the gear, evenly supply the toner from the enclosed toner bottle into the clearance [A] part
between the magnet roller and the ITB cleaning unit.
Caution:
When supplying the toner, don't mix it with impure substance.
7 / 8
Advertisement
