Advertisement
NOTE:
- <If POD deck is connected to the host machine>, refer to 4-1 to 4-3 for removing procedure.
- <If POD deck is not connected to the host machine>, refer to 4-4 for removing procedure.
<If POD deck is connected to the host machine>
4-1) Remove the 2 stopper pins.
- 2 screws
4-2) Turn the control panel in the direction of the arrow until it stops.
4-3) Remove the upper right cover1 in the direction of the arrow.
- 2 screws (loosen)
- Claw in 1 place
< Work procedure 1-2>
12 / 19
Advertisement
