Advertisement
Check the location to install the Laser Scanner Unit for any abnormality. [F]
NOTE:
Since the preparation for removing the Laser Scanner Unit differs between the ADF + Reader mounted
model and ADF + Reader Unit unmounted model, refer to the preparation which corresponds to each model.
Preparation for removing the Laser Scanner Unit (ADF + Reader Unit unmounted model)
1) Open the Front Left Cover and Front Right Cover.
2) Remove the upper front cover.
- 1 rubber bush
- 3 screws (loosen)
3) Remove the upper cover.
- 6 screws
< Work procedure 1-2>
10 / 19
Advertisement
