Advertisement
20) Connect the harness.
・6 Edge Saddles [1]
・15 Wire Saddles [2]
・1 Reuse Band [3]
・2 Connectors [4]
21) After aligning the edge [A] of the flywheel with the edge [B] of the Drum Drive Unit, install the flywheel and
the Gear Unit.
・1 Screw
Points to Note when Installing the Flywheel
- When tightening the screw, be sure to hold the flywheel to prevent it from turning counterclockwise.
<Work procedure 2-12>
10 / 13
Advertisement
