Advertisement
< Check that the bearing at the Engagement/Disengagement Arm of the Registration Slave Roller is
rotating smoothly. [B] >
14) Check that the E-ring [1] has not come off.
15) Rotate the bearing [2] at the Engagement/Disengagement Arm of the Registration Slave Roller, and
check that it rotates smoothly.
< Check that the Drive Belt of the Registration Drive Roller rotates smoothly. [C] >
16) Check that the Drive Belt [3] of the Registration Drive Roller rotates smoothly.
17) If abnormality is found, replace the faulty part.
< Work procedure 1-1>
6 / 7
Advertisement
