Advertisement
<Work procedure 2-9>
Output of the Test Print (Halftone Image)
11) Enter service mode.
Execute COPIER>Test>PG>TYPE>14>OK>Start.
12) Output 3 test prints.
13) End the work when banding image does not occur.
When banding image (band-like image) occurs, perform step 40 and later of "Removing the Drum Cleaning
Unit" and "Procedure for Adding a Process Unit Washer".
Caution:
When banding image does not occur, be sure to keep the following contents instead of discarding them.
[1] 2 washers (φ14)
[2] 1 screw (binding; M4x8)
[3] 1 screw (binding; M4x5)
[1]
[2]
[3]
12 / 16
Advertisement
