Advertisement
6) Open the controller box unit in the direction of the arrow.
- 2 screws
7) Remove the 2 Stepped Screws [1], 2 springs [2] and 2 washers [3] of the Drawer Connector.
8) Apply grease (Super Lube Grease: FY9-6006 is recommended) to the 5mm area of the 2 Stepped
Screws [1] of the Drawer Connector included in the package as shown in the figure.
Install the 2 springs [2] removed in step 7 and the 2 washers (φ8) [3] (1 Spare) included in the package.
<Work procedure 2-5>
10 / 16
Exploded perspective view
Advertisement
