Advertisement
8) Open the Front Left Cover and the Front Right Cover.
9) Bring down the Fixing Feed Unit Lever to pull out the Fixing Feed Unit.
10) Remove the (Upper) Registration Cover, the (Middle) Registration Cover and the (Lower) Registration
Cover in the direction of the arrow.
- 6 screws
11) Remove the Knob Support Plates (Upper Right), (Middle Left), (Middle Right), (Lower Middle), (Lower
Right) and the Lever.
- 11 screws
12) Remove the Gear Boxes (1) and (2).
- 5 screws
<Work procedure 2-2>
8 / 31
Advertisement
