Advertisement
<Work procedure 2-2>
5) Remove the Delivery Switch Motor Unit.
6) Remove the Harness.
- 2 Wire Saddles
- 1 Edge Saddle
- 1 Connector
7) Remove the Delivery Switch Motor Unit.
- 1 Timing Belt
- 2 Screws
8) If abnormality is found in the Feed Rollers (Straight Delivery Roller 1, Straight Delivery Roller 2, Duplex
Vertical Path Roller 1) in this unit, replace the faulty part.
9) Install the removed parts in reverse order.
26 / 31
Advertisement
