Advertisement
11) Prepare a Drum Shaft Unit which is a remedy part, and apply Super Lube about half the size of a rice
grain (about 20mg) to the entire circumference of each of the 2 [A] parts (13 mm each between the end
face of the C-ring and the bearing).
12) Apply Super Lube about the size of a rice grain (about 40mg) evenly across the [A] part which is the side
of the flange of the Drum Shaft (the surface in contact with the Drum Flange).
FRONT
13) Apply grease about the amount of 3 rice grains (about 120mg) to the 30mm area at the leading edge of
the circumference of the Drum Shaft.
<Work procedure 2-12>
[A]
[A]
[A]
FRONT
6 / 13
FRONT
Advertisement
