Canon imagePRESS 1135 Series Troubleshooting Manual page 56

< Work procedure 1-5>
Check the Shaft Support Members of the Process Unit for any damage. [B-2]
1) Open the Front Left Cover and the Front Right Cover.
2) Remove Process Unit Cover.
3) Pull Out Process Unit.
4) Check the 2 Shaft Support Members [1] of the Process Unit and the 2 pins [2] of the Positioning Plate of
the Process Unit for any abnormality.
5) If abnormality is found, replace the faulty part.
6) Install the removed parts in reverse order.
5 / 10