Advertisement
16) Hold the lever [1] of the ITB and the shaft [2] at the rear of the frame of the Intermediate Transfer Belt
Unit.
17) Slide the frame [1] of the Intermediate Transfer Belt Unit to the right, and pull out the hole [A] of the frame
of the Intermediate Transfer Belt Unit from the shaft [2] of the ITB Frame.
18) Lift the frame [1] of the Intermediate Transfer Belt Unit, and pull out the shaft [3] of the ITB Frame from
the groove [B] of the frame of the Intermediate Transfer Belt Unit.
19) Place the frame [1] of the Intermediate Transfer Belt Unit removed from the host machine on paper
stacks or cardboards [2] to prevent it from becoming distorted.
<Work procedure 2-10>
9 / 12
Advertisement
