Advertisement
<Work procedure 1-7>
8) Check the 2 Shaft Support Members [1] of the fame body of the ITB Unit for any damage.
9) If abnormality is found, replace the faulty part.
10) Install the removed parts in reverse order.
Check the Shaft Support Members for any damage: Secondary Transfer Unit [D-1]
1) Open the Front Left Cover and the Front Right Cover.
2) Pull Out Fixing Feed Unit.
3) Remove the Secondary Transfer Outer Unit.
4) Check the 4 Positioning Pins [1] of the Secondary Transfer Outer Unit for any abnormality.
5) If abnormality is found, replace the faulty part.
6) Install the removed parts in reverse order.
10 / 13
Advertisement
