Advertisement
<Work procedure 2-5>
Checking for Any Foreign Matters on the Developing Cylinder Drive Gear and the Developing Upper
Cylinder or Replacing the Developing Sleeve Unit
6) Place the paper on the photosensitive drum.
CAUTION:
Be careful not to expose the photosensitive drum to the light.
7) Clean with lint-free paper moistened with alcohol and then apply grease (Super Lube Grease: FY9-6006
is recommended) to the Positioning Blocks (Upper and Lower) at front and rear sides of the Process Unit.
CAUTION:
Uniformly apply 1 rice-grain sized grease with your finger to the same area as the surface to be cleaned.
2 / 16
Advertisement
