Canon imagePRESS 1135 Series Troubleshooting Manual page 90

4) Check the 2 Shaft Support Members [1] of the Fixing Assembly and the 2 pins [2] of the Positioning Plate
on the host machine side for any abnormality.
5) If abnormality is found, replace the faulty part.
6) Remove the knob.
7) While moving the lever lock at the rear of the fixing feed unit toward front and turn the fixing feed unit
lever in the direction of the arrow (clockwise).
MEMO：
When putting back the fixing feed unit lever, turn the lever lock clockwise while moving it toward front.
<Work procedure 1-7>
12 / 13