Advertisement
8) Remove the secondary transfer outer roller assembled with the 2 secondary transfer holders (with spring)
to the upper.
9) Remove the 2 secondary transfer holders (with spring) from the secondary transfer outer roller.
10) When replacing the 2nd transfer roller for machines having serial numbers earlier than the ones listed in
"Affected Machines" below, apply (approx. 20mg) of the super lube grease(FY9-6005-000), about the
size of half a grain of rice, to the inner circumference of the bearing[A] of the 2nd transfer roller
holder[1](both two holders) for half round or more.
* Once the grease is applied, when replacing the 2nd transfer roller holder in future, grease application is
unnecessary.
<Work procedure 2-4>
4 / 5
Advertisement
