Advertisement
<Work procedure 2-2>
[B-8] Replacing the Feed Roller in the Outer Delivery Unit
NOTE:
This unit contains 1 Feed Roller [1] to be replaced. The location is shown in the figure below.
The following procedure shows how to remove this unit. If necessary, remove this unit and check the Feed
Roller for any abnormality.
1) Open the Front Left Cover.
2) Pull out the Buffer Delivery Unit.
3) Remove the Rear Right Cover.
- 6 Screws
4) Disconnect the Connector of the External Delivery Motor.
30 / 31
Advertisement
