Advertisement
< Work procedure 1-5>
Check the Shaft Support Members of the Fixing Assembly for any damage. [B-1]
1) Open the Front Left Cover and the Front Right Cover.
2) Pull Out Fixing Feed Unit.
3) Remove the fixing feed cover (upper).
- 2 screws
4) Check the 2 Shaft Support Members [1] of the Fixing Assembly and the 2 pins [2] of the Positioning Plate
on the host machine side for any abnormality.
5) If abnormality is found, replace the faulty part.
6) Remove the knob.
2 / 10
Advertisement
