Canon imagePRESS 1135 Series Troubleshooting Manual page 17

< Work procedure 1-2>
Check the Pressure Spring of the Secondary Transfer Roller for any abnormality. [D]
1) Open the Front Left Cover and the Front Right Cover
2) Pull Out Fixing Feed Unit
3) Remove the Secondary Transfer Outer Unit.
4) Remove the 2 screws.
5) Lift the post-secondary transfer guide and put it down on front.
Caution：
Since the harness is connected to the post-secondary transfer guide, be careful not to pull it forcibly.
6) Remove the 2 stop rings.
4 / 19