Parts Replacement Procedure; Main Controller Box - Canon imageRUNNER 7095 Service Manual

Chapter 4
4.6

Parts Replacement Procedure

4.6.1 Main Controller Box

4.6.1.1 Making Preparations
1) Remove the main controller box cover [1].
- 10 screws [2]
[1]
[2]
F-4-11
2) Remove the rear cover [1].
- reader power cable [2]
- 8 screws [3]
[2]
[3]
F-4-12
3) Disconnect the reader communications cable
[1].
F-4-13
4-12
0010-8725
[2]
[2]
[2]
[3]
[3]
[1]
[1]
4.6.1.2 Removing the Main Controller Box
1) Disconnect the connector [1].
[1]
F-4-14
2) Disconnect the connector [1], and free the
cable from the edge saddle [2].
F-4-15
3) Free the cable [1] from the wire saddle [2].
[1] [2]
F-4-16
4) Disconnect the connector [1], and free the
cable [2] from the 2 wire saddles [3].
[1]
F-4-17
[1]
[2]
[2] [3]
0011-4467