Counter Reset - Epson SC-T7000 series Service Manual

SC-T7000 series/SC-T5000 series/SC-T3000 series

4.7 Counter Reset

Whenever the parts/units which have life counter are replaced, the corresponding life
counter must be reset. This is important to replace those parts/units at the correct
timing.
EXECUTION MODE
Normal mode
PROCEDURE
1. Turn the printer ON.
2. Start the Service Program and click [FLAG CHANGE & COUNTER RESET]
from the main menu.
3. Choose one of the counter reset menus to be reset.
4. Click [Run] to reset the counter.
5. Click [Finish].
6. Restart the printer.
7. With NVRAM Viewer, verify that the counter has been reset to "0".
8. Turn the printer OFF.
The history of the Counter Clear can be checked per counter on the
C H E C K
P O I N T NVRAM Viewer (P.
Table 4-10. Clear Counter Menu List
Class Item
Main unit
CR MOTOR
counter (Motor)
ADJUSTMENT
222).
Clear Menu Name
CR Motor Counter
Table 4-10. Clear Counter Menu List
Class
PF MOTOR
APG Motor
Main unit
counter (Motor)
ATC MOTOR
Cutter motor
PRINT HEAD
DAMPER KIT
Main unit
counter (Ink PUMP CAP UNIT
system)
IC HOLDER
INK TUBE
Figure 4-11. [FLAG CHANGE & COUNTER RESET] Screen
Counter Reset
Item Clear Menu Name
PF Motor Counter
APG motor counter reset
ATC Motor Counter Reset
Cutter motor counter reset
Print Head Counter
Damper Kit Counter
Pump Cap Unit Counter
Ink Holder Counter
Ink tube counter
Revision B
231
Confidential