Siemens Sinumerik 840D sl Function Manual page 816

Appendix
A.1 Customer Support
Table A-1 Range of services for machine manufacturers and end customers, continued
Portfolio
Acceptance report
Approval procedure
Workshop
Hotline
On--site service (local)
A-816
SINUMERIK 840D sl/SINAMICS S120 SINUMERIK Safety Integrated (FBSI sl) - - 10.2015 Edition
Description of services
Based on the submitted configuration documentation and commissioning,
an acceptance report for the safety functions is drawn--up. This includes:
Description of the machine (name, type, ...)
S
Description of the safety and operator concept
S
Description of the axis--specific safety functions
S
All of the safety functions are tested including the SPL logic
S
The test results are recorded
S
The customer receives the acceptance report as hard copy and on an elec-
tronic data medium.
Support with the handling and line of argument for the approval procedure
by certified bodies (e.g. the appropriate regulatory bodies/institutes for safety
and health) or large end customers.
Workshops are held on the subject of machine safety adapted to customer--
specific requirements; if required, these workshops can be held at the custo-
mer's site. Possible contents:
Machinery Directive, Standards in general
S
C Standards (machine--specific)
S
Hazard analysis, risk analysis
S
Control categories
S
SINUMERIK Safety Integrated
S
Configuration, machine data
S
Commissioning
S
Acceptance report
S
An expert for "SINUMERIK Safety Integrated
line number should critical errors or problems occur during installation and
commissioning.
Experts analyze problems that are encountered on site. The causes are
eliminated or counter--measures are drawn--up and implemented where
necessary.
®
Function and system description
®
" can be reached at the Hot-
© Siemens AG 2015 All Rights Reserved
10/15