Siemens Sinumerik 840D sl Function Manual page 466

Data Description
8.2 Parameters for SINAMICS S120
r9711[0...1] SI Motion diagnostics results list 2
Display of result list 2, which led to an error between the two monitoring chan-
nels for a crosswise data comparison.
[0]: Result list second channel
[1]: Result list drive
Bit 00 actual value > upper limit SCA1+ (SN1+)
1 signal: Yes, 0 signal: No
Bit 01 actual value > lower limit SCA1+ (SN1+)
1 signal: Yes, 0 signal: No
Bit 02 actual value > upper limit SCA1- - (SN1- -)
1 signal: Yes, 0 signal: No
Bit 03 actual value > lower limit SCA1- - (SN1- -)
1 signal: Yes, 0 signal: No
Bit 04 actual value > upper limit SCA2+ (SN2+)
1 signal: Yes, 0 signal: No
Bit 05 actual value > lower limit SCA2+ (SN2+)
1 signal: Yes, 0 signal: No
Bit 06 actual value > upper limit SCA2- - (SN2- -)
1 signal: Yes, 0 signal: No
Bit 07 actual value > lower limit SCA2- - (SN2- -)
1 signal: Yes, 0 signal: No
Bit 08 actual value > upper limit SCA3+ (SN3+)
1 signal: Yes, 0 signal: No
Bit 09 actual value > lower limit SCA3+ (SN3+)
1 signal: Yes, 0 signal: No
Bit 10 actual value > upper limit SCA3- - (SN3- -)
1 signal: Yes, 0 signal: No
Bit 11 actual value > lower limit SCA3- - (SN3- -)
1 signal: Yes, 0 signal: No
Bit 12 actual value > upper limit SCA4+ (SN4+)
1 signal: Yes, 0 signal: No
Bit 13 actual value > lower limit SCA4+ (SN4+)
1 signal: Yes, 0 signal: No
Bit 14 actual value > upper limit SCA4- - (SN4- -)
1 signal: Yes, 0 signal: No
Bit 15 actual value > lower limit SCA4- - (SN4- -)
1 signal: Yes, 0 signal: No
Bit 16 actual value > upper limit SSM+ (n
1 signal: Yes, 0 signal: No
Bit 17 actual value > lower limit SSM+ (n
1 signal: Yes, 0 signal: No
Bit 18 actual value > upper limit SSM- - (n
1 signal: Yes, 0 signal: No
Bit 19 actual value > lower limit SSM- - (n
1 signal: Yes, 0 signal: No
Bit 20 actual value > upper limit modulo
1 signal: Yes, 0 signal: No
Bit 21 actual value > lower limit modulo
1 signal: Yes, 0 signal: No
See also: C01711
Unit: Default value:
- - - -
r9712 CO: SI Motion diagnostics position actual value motor side
Display of the actual position actual value on the motor side for the motion
monitoring functions on the Control Unit.
The display is updated in the safety monitoring cycle clock.
Unit: Default value:
- - - -
8-466
SINUMERIK 840D sl/SINAMICS S120 SINUMERIK Safety Integrated (FBSI sl) - - 10.2015 Edition
+)
x
+)
x
- -)
x
- -)
x
Minimum value: Maximum value:
- - - -
Minimum value: Maximum value:
- - - -
Checksum: Protection level:
No 3
Data type: Effective:
Unsigned32 - -
Checksum: Protection level:
3
No
Data type: Effective:
Unsigned32 - -
© Siemens AG 2015 All Rights Reserved
10/15