Siemens Sinumerik 840D sl Function Manual page 493

10/15
p60122 IF1 PROFIdrive SIC/SCC telegram selection
Sets the telegram for the Safety Info Channel (SIC)/Safety Control Channel
(SCC)
SIC/SCC telegram p60122 is attached to the PZD telegram p0922/p2079 with
no gaps.
700: Supplementary telegram 700, PZD- -0/3
701: Supplementary telegram 701, PZD- -2/5
999: Free telegram configuration with BICO
The distance to the PZD telegram can be increased with p2070/p2071 (this
distance is the number of receive words between the end of the PZD telegram
and the start of the SIC/SCC telegram). After changing p0922/p2079 or
p2070/p2071, p60122 must be set again.
The telegram interconnections can only be changed if p60122 and p0922 are
set equal to 999.
Unit: Default value:
- - 999
© Siemens AG 2015 All Rights Reserved
SINUMERIK 840D sl/SINAMICS S120 SINUMERIK Safety Integrated (FBSI sl) - - 10.2015 Edition
Minimum value: Maximum value:
700 999
Data Description
8.2 Parameters for SINAMICS S120
Checksum:
No
Data type:
Integer16
Protection level:
3
Effective:
immediately
8-493