Siemens Sinumerik 840D sl Function Manual page 647

10/15
© Siemens AG 2015 All Rights Reserved
SINUMERIK 840D sl/SINAMICS S120 SINUMERIK Safety Integrated (FBSI sl) - - 10.2015 Edition
Remedy
Copy SI data.
33
The setting in MD36951 $MA_SAFE_VELO_SWITCH_DELAY does
not correspond with the associated drive parameter assignment.
Remedy
Copy SI data.
34
The setting in MD36950 $MA_SAFE_MODE_SWITCH_TIME does not
correspond with the associated drive parameter assignment.
Remedy
Copy SI data.
35
The setting in MD36956 $MA_SAFE_PULSE_DISABLE_DELAY does
not correspond with the associated drive parameter assignment.
Remedy
Copy SI data.
36
The setting in MD36957 $MA_SAFE_PULSE_DIS_CHECK_TIME does
not correspond with the associated drive parameter assignment.
Remedy
Copy SI data.
37
The setting in MD36952 $MA_SAFE_STOP_SWITCH_TIME_C does
not correspond with the associated drive parameter assignment.
Remedy
Copy SI data.
38
The setting in MD36953 $MA_SAFE_STOP_SWITCH_TIME_D does
not correspond with the associated drive parameter assignment.
Remedy
Copy SI data.
39
The setting in MD36954 $MA_SAFE_STOP_SWITCH_TIME_E does
not correspond with the associated drive parameter assignment.
Remedy
Copy SI data.
40
The setting in MD36961 $MA_SAFE_VELO_STOP_MODE does not
correspond with the associated drive parameter assignment.
Remedy
Copy SI data.
41
The setting in MD36962 $MA_SAFE_POS_STOP_MODE does not
correspond with the associated drive parameter assignment.
Remedy
Copy SI data.
10.2NCK safety alarms for Sinumerik 840D sl
Diagnostics
10-647