Show Commands - HP Aruba JL253A Management And Configuration Manual

Cause
The no device-profile or the no rogue-ap-isolation whitelist command is executed to configure
untagged-vlan to 0.
Action
No action is required.

Show commands

Use the following show commands to view the various configurations and status.
Command
show device-profile
show device-profile config
show device-profile status
show run
Chapter 21 Simplifying Wireless and IoT Deployments
Description
Shows the device profile configuration and status.
Shows the device profile configuration details for a
single profile or all profiles.
Shows currently applied device profiles.
Shows the running configuration.
731