HP Aruba JL253A Management And Configuration Manual page 496

System module
mld
mtm
netinet
pagp
ports
radius
ratelim
496
Description
Multicast Listener Discovery (MLD):
IPv6 protocol used by a router to
discover the presence of multicast
listeners. MLD can also optimize
IPv6 multicast traffic flow with the
snooping feature.
Multicast Traffic Manager (MTM):
Controls and coordinates L3
multicast traffic for upper layer
protocols.
Network Internet: Monitors the
creation of a route or an Address
Resolution Protocol (ARP) entry
and sends a log message in case of
failure.
Ports Aggregation Protocol (PAgP):
Obsolete. Replaced by LACP
(802.3ad).
Port status and port configuration
features, including mode (speed
and duplex), flow control, broadcast
limit, jumbo packets, and security
settings.
Port messages include events on
POE operation and transceiver
connections with other network
devices.
RADIUS (Remote Authentication
Dial-In User Service) authentication
and accounting: A network server is
used to authenticate user-
connection requests on the switch
and collect accounting information
to track network resource usage.
Rate-limiting: Enables a port to limit
the amount of bandwidth a user or
device may utilize for inbound traffic
on the switch.
Aruba 2930F / 2930M Management and Configuration Guide
Documented in Switch hardware/
software guide
Multicast and Routing Guide
Multicast and Routing Guide
Advanced Traffic Management
Guide
—
Installation and Getting Started
Guide
Management and Configuration
Guide
Access Security Guide
Access Security Guide
Management and Configuration
Guide
Table Continued
for ArubaOS-Switch 16.08