HP Aruba JL253A Management And Configuration Manual page 279

Parameters and options
[ethernet] PORT-LIST
Specify the ports being configured for Ipv6 source-lockdown.
source-lockdown
Enable IPv6 source lockdown for a specific port.
Validation rules
Validation
Verify whether dhcpv6-snooping is enabled
globally
Verify whether port configured is in the VLAN
which is dhcpv6-snooping enabled.
If lockdown is being configured on a trusted port
If the HW resources are not available for changing
dipv6ld global or a port characteristic
If global GVRP is enabled
If no of snooped VLAN count is greater than
max_vlans_with_dipv6ld
If Binding limits are exceeded
If lockdown is being enabled on an interface which
is part of a dynamic trunk (LACP)
If lock down is being configured on a mesh port
If trunk is being formed using a port which has
DIPLDv6 enabled on it.
If DIPLDv6 is configured on a trunk and the trunk
is being removed.
If DIPLDv6 is being is configured on a Smart Link
port
If Smart Link is being enabled on a DIPLDv6
enabled port
Chapter 9 DHCPv6 server
Error/Warning/Prompt
DHCPv6 snooping is disabled.
Ports <PORT-LIST> are not in a DHCPv6
Snooping VLAN.
Port %s is a trusted port.
Cannot enable DIPLDv6 as required resources are
unavailable.
DIPLDv6 cannot be enabled when GVRP is
enabled
DHCPv6 snooping cannot be enabled on %s
VLANs. The switch support only 8 DhCPv6
snooping enabled VLANs when Dynamic Ipv6
lockdown is enabled.
Cannot enable Dynamic Ipv6 Lockdown on ports
%s as manual binding limits are exceeded.
Cannot configure Dynamic Ipv6 Lockdown on
interface %s, it is a Dynamic trunk.
Cannot configure Dynamic Ipv6 Lockdown on a
logical mesh port.
Cannot add a port to a trunk group when Dynamic
IPv6 Lockdown is enabled on that port.
Cannot remove the port %s from the trunk group
because Dynamic IPv6 Lockdown is configured on
the trunk and removing the port will delete the
trunk.
Cannot enable Dynamic IPv6 Lockdown feature on
a Smart Link port.
Cannot configure the Smart Link feature on a port
when the Dynamic IPv6 Lockdown feature is
enabled on that port.
279