Ip-Sla <Id> Clear - HP Aruba JL253A Management And Configuration Manual

Description
Configure the IP Service Level Agreement (SLA) parameters. The value of ID can range from 1-255.
Options
clear
Clear history records, message statistics, and threshold counters of particular SLA entry.
dhcp
Configure DHCP as the IP SLA test mechanism.
disable
Disable the IP SLA.
dns
Configure DNS as the IP SLA test mechanism.
enable
Enable the IP SLA.
history-size
Configure the number of history records to be stored for the IP SLA.
icmp-echo
Configure ICMP echo as the IP SLA test mechanism.
monitor
Configure monitoring parameters and respective threshold-action values.
schedule
Configure the start time, stop time, lifetime, and frequency of run for the IP SLA.
tcp-connect
Configure TCP connect as the IP SLA test mechanism.
tos
Configure the Type of Service value to be set in the test packet for the IP SLA.
udp-echo
Configure UDP echo as the IP SLA test mechanism.
On platforms that support Jitter and VOIP, the following options are also provided:
udp-jitter
Configure UDP jitter as the IP SLA test mechanism.
udp-jitter-voip
Configure UDP jitter for VoIP as the IP SLA test mechanism.
ip-sla <ID> clear
Syntax
ip-sla <ID> clear
Description
Clear history records, message statistics, and threshold counters of a particular SLA entry.
Chapter 17 IP Service Level Agreement 589