Viewing Transceiver Information - HP Aruba JL253A Management And Configuration Manual

For arubaos-switch 16.08

Table of Contents

Cable Status

Distance to Fault The distance in meters to a cable fault (accuracy is +/- 2 meters); displays 0 (zero) if there is

Pair Polarity

Viewing transceiver information

This features provides the ability to view diagnostic monitoring information for transceivers with Diagnostic Optical

Monitoring (DOM) support. The following table indicates the support level for specific transceivers:

Chapter 13 Troubleshooting

Link up or down

Speed of transceiver in Mbps

Type of duplexing

Values are OK, Open, Short, or Impedance

Difference in propagation between the fastest and slowest wire pairs

Signals on a wire pair are polarized, with one wire carrying the positive signal and one

carrying the negative signal.

The MDI crossover status of the two wire pairs (1&2, 3&6, 4&5, 7&8), will be either MDI or

10GbE X2–SC SR

10GbE X2–SC LR Optic V

10GbE X2-CX4 Xcver

Gigabit-SX-LC Mini-

Gigabit-SX-LC Mini-

Gigabit-SX-LC Mini-

100-FX SFP-LC

Gigabit 1000Base-T

Table Continued