Show Ip-Sla <Id> Results - HP Aruba JL253A Management And Configuration Manual

show ip-sla <ID> message-statistics
SLA ID : 1
Status : Running
SLA Type : UDP-Echo
Destination Address : 10.0.0.2
Source Address : 10.0.0.1
Destination Port : 2000
History Bucket Size : 25
Payload Size : 500
TOS : 0
Messages:
Destination Address Unreachable : 0
Probes Skipped Awaiting DNS Resolution : 0
DNS Resolution Failed : 0
No Route to Target : 0
Internal Error : 0
Local Interface is Down : 0
No Response from Target : 0
Successful Probes Sent : 3
Probe Response received : 3
Possibly Tail Dropped : 0
show ip-sla <ID> results
Syntax
show ip-sla <ID> results
Description
Shows the results for the last IPSLA UDP Jitter or UDP Jitter for VoIP test. Note this command is not valid for any
other SLA type.
Switch (config)# sh ip-sla 1 results
Test Results for SLA ID: 1
Probe Id
SLA Type
Destination IP Address
Destination Port
Source IP Address
Source Port
Number of Packets Sent
Number of Packets Received
Minimum Round Trip Time
Maximum Round Trip Time
Average Round Trip Time
Square-Sum of Round Trip Time
Last Succeeded Probe Time
Extended Results:
Packet Loss in Test
UDP-Jitter Results:
RTT Number
Min Positive SD
Max Positive SD
Chapter 17 IP Service Level Agreement
: 10
: UDP-Jitter
: 10.2.2.2
: 4444
: 10.2.2.2
: 5555
: 10
: 10
: 15
: 32
: 17
: 3235
: 2008-05-29 13:56:17.6
: 0%
: 10
: 4 Min Positive DS
: 21 Max Positive DS
: 1
: 28
595