Show System Chassislocate; Show System Power-Supply - HP Aruba JL253A Management And Configuration Manual

VSF-Member
Num | State
-------+-------------+----------+----------
Sys-1 | Fan OK
Sys-2 | Fan OK
0 / 2 Fans in Failure State
0 / 2 Fans have been in Failure State
VSF-Member
Num | State
-------+-------------+----------+----------
Sys-1 | Fan OK
0 / 1 Fans in Failure State
0 / 1 Fans have been in Failure State

show system chassislocate

Syntax
show system chassislocate [vsf member <MEMBER-ID>]
Description
Show locator LED information. If VSF is enabled, this shows locator LED information for all the VSF members.
Parameters
<MEMBER-ID>
The VSF member-ID for the member command or parameter. Member ID value can be in the range of 1 to 8.
Example output
switch(config)#
Locator LED Status
VSF Current
Member State
------ -------
1 off
2 off
3 off
4 off
5 off
6 off
7 off
8 off

show system power-supply

Description
Show chassis power supply information. If VSF is enabled, this shows power supply information for all the VSF
members.
Example output
switch# show system power-supply
Power Supply Status:
684
7
| Failures | Location
| 0
| 0
8
| Failures | Location
| 0
show system chassislocate
Time
Remaining
---------
| Chassis
| Chassis
| Chassis
Configuration
-------------
Aruba 2930F / 2930M Management and Configuration Guide
for ArubaOS-Switch 16.08