Show Job; Show Job <Name - HP Aruba JL253A Management And Configuration Manual

Usage
job <JOB NAME> at <([DD:]HH:]MM on <WEEKDAY-LIST>)> config-save <COMMAND> count <1-1000>
job <JOB NAME> at <[HH:]MM on [MM/]DD> config-save <COMMAND> count <1-1000>
job <JOB NAME> at <EVENT> config-save <COMMAND>
job <JOB NAME> delay <([DD:]HH:]MM> config-save <COMMAND> count <1-1000>
job <JOB NAME> enable | disable
[no] job <JOB NAME>

Show job

Syntax
show job
Description
Show the jobs scheduled.
Show job
switch# show job
Job Scheduler Status and Configuration
Scheduler Status : Waiting for the system time to be set
Name
------------------ ---------------- ------- ---- ------------
Burrrrrrrrrrrr...
baz
foo
a1
a2
a3
NOTE: Caution
The scheduler does not run until the system time is set.
Show job <Name>
Syntax
show job JOB NAME
Description
Show the job by name.
552
Event or
Time
reboot
reboot
17:00 SxTWTxS
12:00
Every 2:14:30 days
Every 00:00:25 days 1
Aruba 2930F / 2930M Management and Configuration Guide
Repeat Save
Count Cfg Command
-- Yes chassislocate blink
-- No show time
-- No savepower led
2 Yes sh time
75 Yes vlan 3
No vlan 4
for ArubaOS-Switch 16.08