HP Aruba JL253A Management And Configuration Manual page 498

System module
stack
stp
system
tacacs
tcp
telnet
498
Description
Stack management: Uses a single
IP address and standard network
cabling to manage a group (up to
16) of switches in the same IP
subnet (broadcast domain),
resulting in a reduced number of IP
addresses and simplified
management of small workgroups
for scaling your network to handle
increased bandwidth demand.
Multiple-instance spanning tree
protocol/MSTP (802.1s): Ensures
that only one active path exists
between any two nodes in a group
of VLANs in the network. MSTP
operation is designed to avoid loops
and broadcast storms of duplicate
messages that can bring down the
network.
Switch management, including
system configuration, switch
bootup, activation of boot ROM
image, memory buffers, traffic and
security filters.
System messages also include
events from management interfaces
(menu and CLI) used to reconfigure
the switch and monitor switch status
and performance.
TACACS+ authentication: A central
server is used to control access to
the switches (and other TACACS-
aware devices) in the network
through a switch's console port
(local access) or Telnet (remote
access).
Transmission Control Protocol: A
transport protocol that runs on IP
and is used to set up connections.
Session established on the switch
from a remote device through the
Telnet virtual terminal protocol.
Aruba 2930F / 2930M Management and Configuration Guide
Documented in Switch hardware/
software guide
Advanced Traffic Management
Guide
Advanced Traffic Management
Guide
Basic Operation Guide
Access Security Guide
Access Security Guide
Advanced Traffic Management
Guide
Basic Operation Guide
Table Continued
for ArubaOS-Switch 16.08