HP Aruba JL253A Management And Configuration Manual page 193

To list the data for only one community, such as the "public" community, use the above command with the
community name included. For Example:
switch# show snmp-server public
Configuring community names and values (CLI)
The snmp-server command enables you to add SNMP communities with either default or specific access
attributes, and to delete specific communities.
Syntax:
[no] snmp-server community <community-name>
Configures a new community name.
• If you do not also specify operator or manager, the switch automatically assigns the community to the
operator MIB view.
• If you do not specify restricted or unrestricted, the switch automatically assigns the community to
restricted (read-only) access.
The no form uses only the <community-name> variable and deletes the named community from the switch.
[operator | manager]
[restricted |
unrestricted]
Example:
To add the following communities:
Community
red-team
blue-team
switch(config)# snmp-server community red-team
manager unrestricted
switch(config)# snmp-server community blue-team
operator restricted
To eliminate a previously configured community named "gold-team":
Chapter 7 Configuring for Network Management Applications
Optionally assigns an access level.
• At the operator level, the community can access all MIB objects
except the CONFIG MIB.
• At the manager level, the community can access all MIB objects.
Optionally assigns MIB access type.
• Assigning the restricted type allows the community to read MIB
variables, but not to set them.
• Assigning the unrestricted type allows the community to read and
set MIB variables.
Access Level
manager (Access to all MIB
objects.)
operator (Access to all MIB
objects except the CONFIG MIB.)
Type of Access
unrestricted (read/write)
restricted (read-only)
193