Table of Contents
Advertisement
When CWMP is disabled
Syntax:
show cwmp status
CWMP status
CWMP Status
CWMP Status
CWMP configuration
show cwmp configuration
CWMP Configuration
CWMP Status
Event logging
The TR-069 client offers some tools to diagnose problems:
•
System logging
•
Status/control commands
System logging
The CPE implements the following system log notification codes and sample messages:
•
RMON_TR69_INFORM_COMPLETE
◦
INFORM to http://15.29.20.50:9090/ from (IP address not set yet) completed with error.
◦
INFORM to http://15.29.20.50:9090/ from 10.0.10.212 completed with error.
◦
INFORM to http://15.29.20.50:9090/ from 10.0.10.212 completed successfully.
•
RMON_TR69_AUTH_FAILED
◦
Authentication on ACS http://15.29.20.50:9090/ failed.
•
RMON_TR69_CONN_FAILED
◦
Connection attempts with ACS http://15.29.20.50:9090/ from 10.0.10.212 failed.
To avoid flooding the system log on frequent attempts to connect with the ACS, the following criteria are used with
both successful and failed attempts:
1. The very first event is always logged.
2. Any change from success to failure or vice versa is always logged.
3. Repeat success or failure events are logged only once every five minutes.
The HTTP file transfer component supports these system log notification codes and sample messages:
Appendix B Remote Device Deployment (TR-069)
: Disabled
: Disabled
761
Advertisement
Table of Contents
Troubleshooting
