Viewing Vlan Information (Cli) - HP Aruba JL253A Management And Configuration Manual

Viewing VLAN information (CLI)

Show command
show vlan
show vlan <vlan-id>
Example:
Suppose that your switch has the following VLANs:
Ports
A1-A12
A1, A2
A3, A4
The next three examples show how you could list data on the above VLANs.
Listing the VLAN ID (vid) and status for specific ports
Switch# show vlan ports A1-A2
Status and Counters = VLAN Information - for ports A1,A2
802.1Q VLAN ID Name
-------------- ------------ ------
1
33
Note: Because ports A1 and A2 are not members of VLAN-44, it does not appear in this listing.
VLAN listing for the entire switch
Switch# show vlan
Status and Counters = VLAN Information
VLAN support : Yes
Maximum VLANs to support : 9
Primary VLAN: DEFAULT_VLAN
390
Output
Lists:
• Maximum number of VLANs to support
• Existing VLANs
• Status (static or dynamic)
• Primary VLAN
For the specified VLAN, lists:
• Name, VID, and status (static/dynamic)
• Per-port mode (tagged, untagged, forbid, no/auto)
• "Unknown VLAN" setting (Learn, Block, Disable)
• Port status (up/down)
VLAN
DEFAULT_VLAN
VLAN-33
VLAN-44
Status
DEFAULT_VLAN Static
VLAN-33 Static
Aruba 2930F / 2930M Management and Configuration Guide
VID
1
33
44
for ArubaOS-Switch 16.08